(3) Brake pedal
The brake is to stop the machine
forcibly. Unlike general automo-
biles, this tractor is equipped
with left and right brake pedals.
Each brake pedal brakes only
one rear wheel on the corre-
sponding side.
J10O317A J10O318A
993C020A
Driving
clutch
pedal
Steering
wheel
Engaging
hook
Connect
Disconnect
(1) Steering wheel
(2) Driving clutch pedal
Depressing the clutch pedal dis-
engages the clutch.
With the clutch pedal depressed,
move the main, range or shuttle
shift lever into the desired posi-
tion and release the pedal. Then,
the clutch is engaged.
There is an engaging hook for con-
necting the left and right brake pedals.
Driving on road - Engage (Both
brake pedals operated together)
Working in eld - Disengage (One
side brake pedal operated)
•
•
Connect the left and right brake
pedals while driving on a road, load-
ing/unloading the tractor or driving
into/out of a field to avoid rollover
and collision.
Inspect the brake pedals periodical-
ly so that they can be operated si-
multaneously without any problem.
•
•
WARNING
At a low speed, the rotating force
of the axle acts greatly, so de-
pressing the brake pedal strongly
with the clutch pedal released can-
not brake the vehicle. To stop the
vehicle, disengage the clutch first
and depress the brake pedals.
•
CAUTION
To Next Page
Loading...
Need help?
General
