UTD1000L User Manual
23
Store Bitmap
Online Help
Set Single Trigger
To store bitmap under the following steps:
1. Press key SHIFT to show character shift on
the right corner of screen
2. Press key OK to store bitmap into the inner
memory of the apparatus
to output bitmap into computer by the home
computer software and to store it in the BMP
format, it is allowed to store 10 groups of bitmap.
To conduct online help under the following steps:
1. Press key SHIFT to show character shift on
the right corner of screen
2. Press key HELP to open help function and
character H shall appear on the upper part of
screen indicating the help function has started
3. Press corresponding menu keys to see
detailed help information
4. Reapeat step 1 and 2 to close help function
To conduct single trigger setting quickly under the
following steps:
1. Press key SINGLE the oscilloscope shall be
set as single trigger mode quickly
;
;
;
,;
;
.
,
;
Notes:
Picture 4-13 Help System
To Next Page
Loading...
Need help?
General
