75
Major instructions:
Self-correction:
Full automatic set:
it can correct oscilloscope-
produced measurement error resulted by
environmental changes, you can operate the
program based on need. For more accurate
calibration, please power on oscilloscope and wait
preheat 20 minutes
the oscilloscope shall adjust
apparatus gear automatically with the changes of
input signal and display the waveform in the fittest
form without manual intervention.
Mathematic operation function is used to display
operation results of channel waveform FFT
To conduct mathematic operation under the
following steps
1. Press key MATH to open mathematic operation
menu
2. Press key F1 to select FFT operation as open.
Set as following table
.
.
:
;
:
Mathematic Operation Function
Picture 6-30 FFT operation
UTD1000L User Manual
To Next Page
Loading...
Need help?
General
