UNI-T UTD1025CL User Manual

4. Connect the red and blace table pen with the
measured point when the
the meter shall
sound tick
To measure capacitance under the following steps:
1. Press key R the menu shall display the
measurement type resistance
2. Press key F1 the menu shall display the
measurement type continuity
3. Insert blace table pen into COM banana socket
input port and red one into banana socket input
port
4. Connect the red and blace table pen with the
capacitor being measured the screen shall
display capacitance value reading of the
capacitor being measured
please use the relative value measurement
method in measuring capacitance lower than 5 nF
and to improve measurement accuracy
,
,
“…”
,
:.
,
:.
.
;
.
.
measured point
resistance is lower than 10 Ω
Ω
Measure Capacitance
Notes:
UTD1000L User Manual
35
Picture 5-3 Continuity Measurement
Picuture 5-4 Continuity Measurement

UNI-T UTD1025CL Specifications

General

Brand	UNI-T
Model	UTD1025CL
Category	Test Equipment
Language	English