UNI-T UTD1025CL User Manual

UTD1000L User Manual
36
Measure DC Voltage Measure AC Voltage
:
,
:.
.
,
:
,
:.
,
:.
.
,
To measure DC voltage under the following steps
1. Press key V the menu shall display the
measurement type DC Voltage
2. Insert blace table pen into COM banana
socket input port and red one into banana
socket input port
3. Connect the red and blace table pen with the
measured point and the screen shall display the
DC voltage value of the measured point as
shown in the following picture:
To measure AC voltage under the following steps
1. Press key V the menu shall display the
measurement type DC Voltage
2. Press key F1 the menu shall display the
measurement type AC voltage
3. Insert blace table pen into COM banana
socket input port and red one into banana
socket input port
4. Connect the red and blace table pen with the
measured point and the screen shall display the
AC voltage value of the measured point
V
V
Picture 5-5 DC Voltage Measurement
Picture 5-6 AC Voltage Measurement

UNI-T UTD1025CL Specifications

General

Brand	UNI-T
Model	UTD1025CL
Category	Test Equipment
Language	English