Putting the handset into service 13
To remove the handset, press the opener on the attachment clip and slide the
handset from the pin.
Inserting the battery
The handset is supplied with an approved battery. The battery is not charged
when supplied. It is first charged in the handset.
Opening the battery compartment
1. Loosen and remove the screw from the battery cover with the Allen key.
2. Insert a suitable screwdriver into the recess between the housing and battery
cover, turn it and then raise the battery cover.
3. Lift up the battery cover from the housing.
While you are wearing the handset on the belt you will be able to read the
display without having to remove the handset, see
Page 100.
• Do not remove the battery in Ex zones.
• Please observe the safety notes
Page 2.
• Only use approved batteries
Page 121.
• Open the battery compartment in a dust-free environment only.
• Your phonebook entries and all settings remain stored even if you re-
move the battery. The date and time settings will be reset.
• Only remove the battery if it is defective. The battery's life diminishes
each time it is removed.
To Next Page
Loading...
Need help?
General
