66 Group functions
Group functions
Activating/deactivating group calls
If this has been configured by the service engineer, you belong to one or more
groups of internal users that can be reached at a hunt group or group call phone
number. Calls are signalled on all telephones in the group either in succession
(=hunt group) or simultaneously (=group call), until a member of the group an
-
swers the call. Every user in the group can also remain available under his own
phone number.
You can leave and re-join specific groups or leave and re-join all groups.
These functions can also be called directly by entering the relevant code
Page 107.
You belong to a hunt group or group call group
Use this function to leave or re-join the hunt group or group.
c or d Press and hold the Talk key or press and hold the Speakerphone key.
Open the system menu.
Either:
> < [ Select the menu item and confirm. You have now left the hunt group or group.
Or:
> < [ Select the menu item and confirm. You have now re-joined the hunt group or
group.
then:
a Press the On-hook key to end the operation.
To Next Page
Loading...
Need help?
General
