Setting the handset 97
Activating/deactivating automatic call
answering
This function allows you to accept calls by removing the handset from the charg-
ing shell.
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm.
s t Select the menu item.
Press the display key. The activated function is ticked (³) and can be deacti-
vated by selecting it once more.
Setting the date and time
The date and time setting can be used to ensure that the date and time are as-
signed correctly to incoming calls and in order to use the alarm.
The handset date and time are automatically set when you set up a call to an-
other station. If your communications system does not support this function, you
can set the date and time manually.
Either:
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm.
Or: If the date and time have not yet been set:
Press the display key.
then:
o Enter the date, for example 22.09.2007 = 22092007.
s Move the cursor down one line.
o Enter the time, for example 19:05 = 1905.
Save the settings.
Can only be set if this menu item is visible. To set, see Page 101.
If your communications system does not automatically set the date and
time, you must check the setting from time to time and if necessary, cor
-
rect it.
To Next Page
Loading...
Need help?
General
