Universal Robots UR5 Original Instructions

14 Setup Screen
• Initialize Robot Goes to the initialization screen, see 10.4.
• Language and Units Configure the language and units of measurements for the
user interface, see 14.1.
• Update Robot Upgrades the robot software to a newer version, see 14.2.
• Set Password Provides the facility to lock the programming part of the robot to
people without a password, see 14.3.
• Calibrate Screen Calibrates the “touch” of the touch screen, see 14.4.
• Setup Network Opens the interface for setting up the Ethernet network for the
robot control box, see 14.5.
• Set Time Set the time and date for the system and configure the display formats
for the clock, see 14.6.
• Back Returns to the Welcome Screen.
Version 3.1 (rev. 17782)
Copyright © 2009-2015 by Universal Robots A/S. All rights reserved.
II-85 CB3

Universal Robots UR5 Specifications

General

Brand	Universal Robots
Model	UR5
Category	Robotics
Language	English