Declaration of Conformity for Recreational Craft Propulsion Engines with the sound and
exhaust emission requirements of Directive 2013/53/EU
D4, D6
Engine manufacturer
AB Volvo Penta, Gropegårdsgatan, 405 08 Göteborg, Sweden
Body for exhaust emission assessment
DNV GL SE Approval
Brooktorkai 18
20457 Hamburg
Germany
ID Number: 0098
Body for sound emission assessment
International Marine Certification Institute
Rue Abbé Cuypres 3
B-1040 Bruxells
Belgium
ID Number: 0609
Modules used for exhaust emission assessment Module used for sound emission assessment
B + C A1
Other Community Directives applied: EMC 2014/30/EU
Description of engine(s) and essential requirements: 4 stroke diesel engine and stern drive with integral exhaust
Engine model(s) covered by this declaration
Exhaust
Sound
Engine model(s) EC Type certificate number Engine model(s)/drive EC Type certificate number
D4-150A D4-150A / DPH, DPI
D4-175I D4-230A / DPH, DPI
D4-230I/A D4-270A / DPH, DPI
D4-270I/A D4-300A / DPH, DPI
D4-300I/A D4-320A / DPI..................................................SDVOLV011
D4-320I/A D6-300A / DPH, DPI
D6-300I/A D6-340A / DPH, DPI
D6-340I/A D6-380A / DPH, DPI
D6-380I/A D6-400A / DPH, DPI
D6-400A D6-440A / DPI..................................................SDVOLV012
D6-440I/A
D6-480I.........................................................RCDB0000096
Essential requirements Standards Used
Other normative document
Annex I.B - Exhaust Emissions
Engine identification Volvo Penta std Annex
I.B.1
Exhaust emission requirements EN ISO 18854:2015 Annex
I.B.2
Durability Volvo Penta std Annex
I.B.3
Operator’s Manual ISO 10240:2004/A1:2015
Annex
I.B.4
Annex I.C – Noise Emissions
Sound emission levels EN ISO 14509-1:2018 Annex
I.C.1
Operator’s Manual ISO 10240:2004/A1:2015
Annex
I.C.2
EMC Directive
EN 60945, EN 55012, EN 5022 Volvo Penta TR2135458
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the engine manufac-
turer that the engine(s) mentioned above complies with all applicable essential requirements in the way specified and is in confor-
mity with the type for which above mentioned EC type examination certificate(s) has been issued.
Name and function: Tom Tveitan, Regulatory Affairs and
Safety Compliance (identification of the person empowered to
sign on behalf of the engine manufacturer or his authorised
representative)
Date and place of issue: (yr/month/day) 2019/02/20 Göteborg
S
ignature and title:
(or an equivalent marking)
RASC-03/19-01