Powertrim panel
The Power Trim panel allows you to adjust the angle of
the drive with respect to the transom.
For twin engine installations, the control panel can be
used to make individual or simultaneous adjustments
to the drives.
By trimming out the drive away from the transom, the
bow will be ”raised” in relation to the horizontal axis and
trimming in the drive will ”lower” the bow of the boat
+ Will trim the drive away from the transom, the bow will
be ”raised” in relation to the horizontal axis.
– Will trim the drive away towards the transom, ”lower”
the bow of the boat.
For further information on Power Trim refer to Trim
Ranges, page 49.
Instruments and Controls
28 47712786 11-2022 © AB VOLVO PENTA
To Next Page
Loading...
