59
Timing cover and drive
16
Install the cap of the timing cover, operation 15A-01
and install the inspection hatch.
17
Install the mounting screw in the adjustment hole in
the camshaft cover.
18
Connect the battery.
Fuel injection pump pulley,
replacement (15A-05)
Special tools: 885037, 885027, 885029
1
Disconnect the battery.
2
Remove the screw over the adjustment hole in the
camshaft cover. Turn the crankshaft until the ad-
justment hole in the front of the camshaft corre-
sponds with the hole in the cover. Install the adjust-
ment drifts 885037 in the camshaft and the flywheel.
3
Remove the cap of the timing cover, operation 15A-
01.
4
Slacken off and remove the nut for the fuel injection
pump pulley. Unscrew the mounting screws for the
camshaft pulley.
5
Remove the timing belt, operation 15A-04.
6
Remove the pulley with pulley puller 885027 and
adapters 885029. Take care not to lose the key.
To Next Page
Loading...
Need help?
General
