BA DT08 SL EN – Edition 1.0 * dt08b110.fm 1-3
Introduction
1.3 Brief description
The model DT08 dumper is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
The main components of the machine are:
• Tracked travel gear
• Control stand with integrated oil and fuel tanks
• Internal combustion engine
• Model DT08-P: single-cylinder petrol engine
• Model DT08-D: single-cylinder diesel engine
•Skip
• High-tip skip (option)
• Loader unit (option)
Definition of operator’s control stand
The dumper’s control stand is the:
• Foothold
• Control stand
Operate the machine only by means of the foothold and the control stand.
The driver must not lean or reach outside the dimensions of the machine. This
applies in particular to his feet –
Danger of accidents
☞ Stand on the foothold ensuring that neither your feet nor other limbs pro-
trude beyond the dimensions of the machine!
The driver must always firmly hold onto the handle of the control stand with
both hands –
Danger of accidents
☞ The driver is subjected to high acceleration forces in particular when mov-
ing off with the machine!
1.4 Regulations
Requirements to be met by the driver
Earth moving machines may be driven and serviced only by persons who meet the follow-
ing requirements:
• 18 years or older
• Physically and mentally suited for this work
• Persons have been instructed in driving and servicing the earth moving machine and
have proven their qualifications to the contractor
• Persons are expected to carry out work reliably.
They have been appointed by the contractor for driving and servicing the earth moving
machine.
Get informed on and follow the legal regulations of your country.
To Next Page
Loading...
Need help?
General
