BA DT08 SL EN – Edition 1.0 * dt08b610.fm 6-33
Specifications
6 Specifications
6.1 Engine
Sturdy steel sheet chassis, rubber-mounted engine
6.2 Hydraulic system
6.3 Undercarriage
Engine
Model DT08-D Model DT08-P
Product
Yanmar diesel engine Honda petrol engine
Type
L100N6 CA1T1AAS1 GX 270 U QE OH
Design
Air-cooled 4-stroke engine
No. of cylinders
1
Displacement
435 cm³ 270 cm³
Nominal bore and stroke
86 x 75 mm 77 x 58
Output
6.8 kW at 3100 rpm 6.6 kW at 3600 rpm
Max. torque
22.5 Nm at 2000 rpm 17.7 Nm at 2500 rpm
Max. engine speed without load
3100 +/− 30 rpm 3850 +/− 100 rpm
Idling speed
1200 +/− 30 rpm 1400 +/− 150 rpm
Fuel injection system
Mechanical governor Electronic ignition
Starting aid
Reverse starter
Battery
12 V/44 Ah 12 V/30 Ah
Max. inclined position (engine no
longer supplied with oil):
20° continuously 20° continuously
Exhaust values according to
97/68 EC, EPA 97/68 EC, EPA
Hydraulics
Model DT08-D Model DT08-P
Pump
3 gear pumps
6 + 3.2 + 3.2 cm³/rev
Flow rate
41 l/min at 3600 rpm
Operating pressure for work
hydraulics
150 bar
Operating pressure for drive
hydraulics
175 bar
Hydraulic tank capacity
22.3 l 22.3 l
Undercarriage
Model DT08-D Model DT08-P
2 drive speeds
2.1 and 4.0 kph
Theoretical climbing ability
20°
Track width
180 mm
No. of track rollers on either side
3
Ground clearance
110 mm
Ground pressure
0.19 – 0.36 kg/cm² 0.16 – 0.34 kg/cm²
To Next Page
Loading...
Need help?
General
