BA DT08 SL EN – Edition 1.0 * dt08b210.fm 2-1
Safety instructions
2 Safety instructions
2.1 Identification of warnings and dangers
Important indications regarding the safety of the staff and the machine are identified in this
Operator’s Manual with the following terms and symbols:
Failure to observe the instructions identified by this symbol can result in
personal injury or death for the operator or other persons.
☞ Measures for avoiding danger
Failure to observe the instructions identified by this symbol can result in
damage to the machine.
☞ Measures for avoiding danger for the machine
This symbol identifies instructions for a more efficient and economical use of the
machine.
Failure to observe the instructions identified by this symbol can result in damage to the
environment. The environment is in danger if environmentally hazardous material (e.g.
waste oil) is not subject to proper use or disposal.
2.2 Warranty
Warranty claims can be brought forward to your Wacker Neuson dealer only.
Furthermore, the instructions in this Operator’s Manual must be observed.
2.3 Disposal
All fluids, lubricants, material, etc., used on the machine are subject to specific regulations
regarding collection and disposal. Dispose of different materials and consumables sepa-
rately and in an environmentally friendly manner!
Disposal may be carried out by a Wacker Neuson dealer only. Also observe the national
regulations regarding disposal!
Avoid damage to the environment! Do not allow the oil and oily wastes to get
into the ground or stretches of water!
To Next Page
Loading...
Need help?
General
