Wacker Neuson DT08-D User Manual

3-10 BA DT08 SL EN – Edition 1.0 * * dt08b330.fm
Operation
Manual starter
Caution!
Do not allow starter handle C to whiplash against the engine.
☞ Carefully move back handle C to avoid damage to the starter.
☞ Slightly pull starter handle C until you can feel a resistance, then slowly release starter
handle C.
☞ Press decompression lever D all the way down.
☞ Firmly and quickly pull starter handle C with both hands
➥ If the engine does not start:
☞ Repeat the procedure.
Notice!
The engine will not start unless the cable is pull fully and firmly!
Electric starter
☞ Turn the ignition key to position 1
Turn and hold the ignition key in position 3 until the engine starts
➥ If the engine does not start after 5 seconds
☞ Stop starting the engine and try again after 10 seconds
➥ If the engine still does not start after the second try
☞ Contact a Wacker Neuson workshop for troubleshooting
➥ As soon as the engine runs:
☞ Release the ignition key
Notice!
Do not actuate the electric starter for more than 5 seconds.
Fig. 35: Starter handle
C
Fig. 36: Decompression lever
D
Fig. 37: Starting
1
3

Wacker Neuson DT08-D Specifications

General

Brand	Wacker Neuson
Model	DT08-D
Category	Construction Equipment
Language	English