BA DT08 SL EN – Edition 1.0 * dt08b340.fm 3-25
Operation
☞ Tilt in the loader unit fully E
☞ Pull control lever 1 backwards D
Carry out slow movements of the loader unit. This distributes the material evenly in
the skip.
Transporting with a full skip
Careful when driving in rough terrain with a full skip –
Danger of accidents!
Pay particular attention to this when cornering or driving on slopes. In order to
avoid accidents:
☞ Fully dump in the skip
☞ Observe the maximum angle when driving on slopes
☞ Fully dump in the skip A
☞ Lower the loader unit (option) to transport position B
☞ Always reverse up a slope at low speed with a full skip
Fig. 60: Fully tilt in the loader unit
1
D
E
Fig. 61: Transporting with a full skip
B
A