BA 1404 en – Edition 2.7 * 1404b330.fm 3-59
Operation
Shatter protection for canopy (option)
Danger of piercing/penetration by objects from the front!
Causes serious injury or death.
☞ A shatter protection must be installed on a canopy version if an attachment
(for example a hammer) causes fragments to fly around. This shatter pro-
tection takes over the function of a front window. If the machine is equipped
with a cabin, the front window must be closed during hammer operation.
☞ Pay attention to the restricted work range (see Fig. 130).
☞ Machine operation is prohibited without a shatter protection.
Accident hazard in conditions of restricted visibility due to rain, snow-
fall, dust, etc.!
Causes serious injury or death.
☞ Stop machine operation immediately.
The shatter protection (canopy option) protects the driver against fragments from
the front.
• The machine owner must ensure that the hazard situation is evaluated and that
the national regulations are observed.
• The machine owner must ensure that only work is performed that does not
require any higher protection.
• Accidents cannot be fully avoided despite equipping a machine with protective
structures.
Do not use brushes, steel wool or other abrasive cleaners for cleaning the polycar-
bonate disk. Do not wipe dust in a dry state.
Only an authorized workshop may install the protective structures for the first time.
To Next Page
Loading...
Need help?
General
