BA 1404 en – Edition 2.7 * 1404b330.fm 3-25
Operation
3.10 Telescopic travel gear (option)
Danger of crushing due to tipping over of machine!
Can cause serious injury and death.
☞ Only perform work with an extended telescopic travel gear.
☞ Performing machine travel with a retracted telescopic travel gear is only
allowed for machine travel over very short distances through passages.
Pay attention to the reduced stability.
☞ Retract or extend the telescopic travel gear completely.
☞ Raise the boom 20 – 30 cm (8 – 12 in) off the ground and position it straight
ahead at the center of the machine. In an emergency, lower the boom
immediately so that the vehicle does not tip over.
Crushing hazard when retracting the telescopic travel gear!
Can cause serious injury or death.
☞ Do not allow anyone to stay in the danger zone.
Damages to the machine while driving through passages:
• The width of the stabilizer blade and telescopic travel gear must be narrower
than the width of the passage.
Raise the stabilizer blade before moving off.
To Next Page
Loading...
Need help?
General
