3-36 BA 1404 en – Edition 2.7 * * 1404b330.fm
Operation
3.19 Retracting belt (option)
Injury hazard! Do not drive or work with the seat belt unbuckled.
Causes serious injury or death.
☞ Fasten and adjust your seat belt before moving off or operating the machine.
☞ Do not twist the seat belt when you fasten it.
☞ Firmly fasten your seat belt over your hips and not over your stomach.
☞ Do not place the seat belt over hard, edged or fragile items (for example tools).
☞ Seat belt buckle must not be obstructed by foreign bodies (paper or simi-
lar); otherwise the buckle latch cannot lock into place.
☞ The seat belt must be replaced by an authorized workshop after an acci-
dent, and the bearing capacity of the fastening points and seat fixtures must
be checked.
☞ Check the seat belts at regular intervals. Have damaged parts immediately
replaced by an authorized workshop.
Seat belt S is for the operator’s safety.
Fastening the seat belt:
☞ Fasten the seat belt as follows before starting the machine:
• Hold belt on buckle latch A and run it slowly and steadily over the hips to buckle B
• Insert buckle latch A into buckle B with an audible click (pull test)
• Tighten the seat belt by pulling at its end
➥The seat belt must be tightly in place over the hips!
Abb. 91: Unwinding the seat belt
S
A
Abb. 92: Fastening the seat belt
A
B
To Next Page
Loading...
Need help?
General
