Xerox D110 System Administration Guide

4. Select Save to save the settings and return to the previous window.
Auto Print
Set the time from the end of print job until the execution of next print job. Set the value
from 1 to 240 seconds, in one second steps. If you select Off, printing can start
immediately, once the machine is ready.
1. From the Machine Clock/Timers window, select Auto Print, and then select Change
Settings.
2. Select Off or On.
3. If you selected On, set the time by using the arrows, or the numeric keypad to enter
a numeric quantity.
4. Select Save to save the settings and return to the previous window.
Printer Lockout Duration
Set the time from the start to the end of printer lockout. Set the values from 0 to 23
hours and to 59 minutes. If you select Off, no printer lockout occurs.
1. From the Machine Clock/Timers window, select Printer Lockout Duration, and then
select Change Settings.
2. Select Off or On.
3. If you selected On, set the Start and End time by using the arrows, or the numeric
keypad to enter a numeric quantity.
4. Select Save to save the settings and return to the previous window.
Energy Saver Timers
In energy saving mode, there is a low-power mode and a sleep mode, and when the set
time has elapsed from the last operation on the machine, the machine goes to low-power
mode, then to sleep mode.
The Energy Saver Timers feature allows the amount of time specified to elapse before
the machine enters Low Power Mode or Sleep Mode. Options include:
• From Last Operation to Low Power Mode: Specify a time period between the last
operation and while entering into the Low Power mode in the range from 1 through
240 minutes, in one minute increments.
• From Last Operation to Sleep Mode: Specify a time period between the last operation
and while entering into the Sleep mode from 1 through 240 minutes, in one minute
increments.
Note
Set the Sleep Mode time for a longer time interval than the Low Power Mode time.
1. From the Energy Saver settings window, select Energy Saver Timers, and then select
Change Settings.
2. Set low-power mode and sleep mode.
a) From Last Operation to Low Power Mode: Set the time to go from last operation
to low-power mode. Set the time from 1 through 240 minutes, in 1 minute
increments.
Xerox
®
D95/D110/D125/D136 Copier/Printer10-6
System Administration Guide
System Settings

Xerox D110 Specifications

General

Brand	Xerox
Model	D110
Category	Printer
Language	English