Xerox D110 System Administration Guide

For MacOS
®
10.5 or later
• Safari 5.x or later
• Firefox 20.x or later
Ethernet
This section describes the settings for the Ethernet interface.
1. Connect to CentreWare Internet Services.
2. Click the Properties tab.
3. Click Connectivity, then click Physical Connections to display the items in the folder.
4. Click Ethernet.
5. Set the communication speed for the Ethernet interface using the Ethernet Settings
pull-down menu.
6. Select Apply.
EtherTalk
This section describes the settings for EtherTalk.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare Internet Services.
b. Click the Properties tab.
c. Click to the left of Connectivity and to the left of Protocols to display the items
in the folder.
2. Click EtherTalk.
3. Set the Printer Name.
4. Set Zone Name.
5. Select Apply.
Microsoft Networking (SMB)
This section describes how to configure settings for Microsoft Networking.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare Internet Services.
b. Click the Properties tab.
c. Click to the left of Connectivity and to the left of Protocols to display the items
in the folder.
2. Select a transport protocol from the Transport drop-down list.
3. Click Microsoft Networking.
4. Select a transport protocol from the Transport drop-down list.
Xerox
®
D95/D110/D125/D136 Copier/Printer3-4
System Administration Guide
Using CentreWare Internet Services

Xerox D110 Specifications

General

Brand	Xerox
Model	D110
Category	Printer
Language	English