SMTP
Simple Mail Transfer Protocol (SMTP) is used by the printer’s email feature to deliver
scanned images. After you enable SMTP, the Email button is enabled on the Control
Panel.
This section describes how to configure SMTP server settings.
1. In CentreWare, select Properties > Connectivity > Protocols.
2. Select SMTP Server.
3. Under Required Information, select the method to use to locate an SMTP server:
Static or From DNS.
4. Type the SMTP server IP address or host name.
5. Enter the port numbers for sending and receiving email. The default is 25.
6. Type the specific email address assigned to this printer by the SMTP server in the
Machine’s Email Address field.
7. Select Apply.
WSD
Web Services for Devices (WSD) is the technology from Microsoft that provides a standard
method for discovering and using network connected devices. It is supported in Windows
operating systems since Windows Vista and Windows Server 2008. WSD is one of several
supported communication protocols.
Ensure that the printer and client computers are on the same IP subnet. This section
describes how to configure the WSD print server.
1. In CentreWare, select Properties > Connectivity > Protocols.
2. Select WSD.
3. Edit the following settings if needed.
a) Set the Port Number. The default is 80.
b) Set the Data Receive Time Out in seconds. The default time is 30.
c) Set the Notification Delivery Time Out in seconds. The default time is 8.
d) Set the Maximum TTL. The default value is 1.
e) Set the Maximum Number of Subscribers. The default number is 50.
4. Select Apply.
IPP
Internet Printing Protocol (IPP) is used for remote printing and managing print jobs.
This section describes the settings for the IPP port.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare Internet Services.
b. Click the Properties tab.
Xerox
®
D95/D110/D125/D136 Copier/Printer3-12
System Administration Guide
Using CentreWare Internet Services
To Next Page
Loading...
Need help?
General