64 4 Setting on the Control Panel
Changing Menu Settings
Basic Operations (Example: Changing the Low Power Timer)
Press one of the following buttons to display the menu screen or to set the printer by
browsing though each menu structure. In this example, you set the transitional time to the
Low Power Mode to 30 mins.
Ready to print
1. To display the menu screen, press the <Menu> button at the print screen.
Menu
Report / List
2. To move between items in the same level, press the < > or < > button.
Menu
Admin Menu
3. To move between structure levels, press the < > (or the <Eject/Set>
button) or < > button. Press the < > button to go to the lower level or
press the < >button to return to the upper level.
Admin Menu
Wired Network
4. Press the < > or < > button until [System Settings] in the same level
is displayed.
Admin Menu
System Settings
5. Press the < > or <Eject/Set> button to go to the lower level.
System Settings
Low Power Timer
6. Press the < > or <Eject/Set> button to go to the lower level.
Low Power Timer
3 Minutes
*
7. Press the < > or < > button to set the proposed value.
Continued on next page
To Next Page
Loading...
Need help?
General