Xerox DocuPrint C2100 User Manual

4.2 Description of Menu Items 77
PostScript Settings
Specifies the settings related to PostScript.
Note
• The DocuPrint C2100 does not support PostScript.
2 Sided Specifies the 2 sided printing settings.
• [2 Sided Print]
Specifies whether to perform 2 sided printing. The default is [Off].
• [Binding Edge]
Specifies the binding direction from [Long Edge Flip] or [Short Edge Flip]. The default
is [Long Edge Flip].
Font Specifies the font used. The default is [Courier].
Symbol Set Specifies the font for symbols. The default is [ROMAN-8].
Font Size Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and
50.00 in increments of 0.25.
Font Pitch Specifies the character spacing. The default is [10.00]. You can specify a value between
6.00 and 24.00 in increments of 0.01.
Form Lines Specifies the form line (the number of lines per form). The default is [64]. You can
specify a value between 5 and 128 in increments of 1.
Quantity Specifies the copies to be printed between 1 to 999. The default is [1].
Image Enhance Selects whether to perform image enhancement.
Image enhancement is a feature that makes the boundary line between black and white
smoother to decrease jags and enhance the visual appearance. The default is [On].
HexDump Specifies whether to print the data sent from a computer in the ASCII code
corresponding to the hexadecimal notation format in order to check the data contents.
The default is [Disable].
Draft Mode Specifies whether to print in draft mode. The default is [Disable].
Line Termination Sets the line termination.
• [Off] (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
• [Add-LF]
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
•[Add-CR]
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
• [CR-XX]
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Output Color Specifies the color mode to Color or Black. This settings is used when the color printing
mode setting is not specified for the print job that is sent to the printer.
• [Black] (default)
Prints in black and white mode.
• [Color]
Prints is the color mode.
Item Description
PS Error Report Sets whether to print an error report in case of a PostScript error.
• [On] (default)
• [Off]
Note
• After changing this setting, reboot the printer.
Item Description

Xerox DocuPrint C2100 Specifications

General

Brand	Xerox
Model	DocuPrint C2100
Category	Printer
Language	English