Xerox DocuPrint C2100 User Manual

4.3 Menu List 79
4.3 Menu List
For details on each feature, refer to “4.2 Description of Menu Items” (P. 66).
• Main operation and buttons on the control panel
Note
• indicates items that can be configured when optional accessories are installed.
c: 550 sheet feeder d: Additional memory e: Network expansion card f: Duplex unit
• The 550 sheet feeder, network expansion card and duplex unit come standard with the DocuPrint C3210 DX.
• * indicates default value.
Continued on next page
Display/Close the Menu screen <Menu> button
Switch between the menu levels
< > button (moves one level downwards) or < > button (moves one level
upwards)
Switch between menu or items in the
same level
< > button (displays the previous menu or item) or < > button (displays
the next menu or item)
Move the cursor (_) of the setting value the
right or left
< > button (moves to the right) or < > button (moves to the left)
Confirm setting <Eject/Set> button
Reset settings to default value
Press <
> and < > button at the same time.
Report / List
Meter Readings
Meter 1, Meter 2, Meter 3, Meter 4
D emo Print - A4 Sample, * Demo Print - 2-Sided Sample, * Stored Documents
1
2
LPD, Port9100, IPP
StatusMessenger, InternetServices
Admin Menu
Ethernet Auto
*
, 10M Half Duplex, 10M Full Duplex,
100M Half Duplex,100M Full Duplex
TCP/IP
Get IP Address DHCP / Autonet
*
, BOOTP,
RARP, DHCP, Panel
IP Address,
Subnet Mask,
Gateway Address
000.000.000.000
*
Protocol
Enable
*
, Disable
IP Filter
Initialize NVM
Wired Network
3
3
3
IPX/SPX
3
Ready to print
SMB (NetBEUI), FTP,
3
3
Bonjour (mDNS),
HTTP - SSL/TLS
4
*
E-mail Printings,
*
3 [Stored Documents] is displayed when [RAM Disk] is set to [Enable] and the optional additional memory is installed.
*
2 [Demo Print - 2-Sided Sample] is displayed when the duplex unit (optional) is installed.
<Menu> button
No.n / Address
No.n / Mask
No.n / Mode
000.000.000.000
*
Off
*
, Accept, Reject
n: 1 - 5
Ready to init
NetWare
NetWare IP Enable
*
, Disable
NetWare IPX
Enable
*
, Disable
SNMP
SNMP (UDP/IP)
Enable
*
, Disable
Enable
*
, Disable
3
Auto
*
, Ethernet II, Ethernet 802.3,
Ethernet 802.2, Ethernet SNAP
SNMP
3
(IPX)
4
*
The security function cannot be used on the models
that are sold in China (TL300416/TL300419).
To switch the layer < > < >
in a menu
To switch menus and < > < >
items in the same layer
To configure the settings <Eject/Set>
Printer Settings, Panel Settings, PCL Font List, PCL Macro List, * PS Font List, * PDF Font List,
, SMB (TCP/IP),
3
Error History, Print Meter,
11
1
3
*1 [PS Font List] and [PDF Font List] are not displayed on the DocuPrint C2100.
Adobe Protocol
Auto*, Standard, BCP, TBCP, Binary
Bi-directional
Enable
*
, DisableParallelSettings
Adobe Protocol
Auto, Standard, BCP,
TBCP*, Binary,
Job History,
USB Settings
Adobe Protocol
Auto, Standard, BCP,TBCP*, Binary,

Xerox DocuPrint C2100 Specifications

General

Brand	Xerox
Model	DocuPrint C2100
Category	Printer
Language	English