Paper and Media
166 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
Loading the Envelope Tray
You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray and
holds the following envelope sizes:
• Monarch and No.10
• DL and C5
To load the Envelope Tray:
1. Pull out the Envelope Tray until it stops.
2. L
oad envelopes, in the tray:
− For DL, Monarch, No. 10, and C5 envelopes with the flap on a long edge, load envelopes face
down with the flaps closed, and flaps toward the left.
• Adjust the paper guides so that they rest lightly against the edges of the envelopes.
Ensure that the maximum fill line is visible or that there are no more than 50 envelopes
loaded in the tray.
− For C5 envelopes with the flap on a short edge, load envelopes face down with the flap closed,
and flap toward the left.
To Next Page
Loading...
Need help?
General
