EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink B7030

Xerox VersaLink B7030 User Manual

Xerox VersaLink B7030
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
Troubleshooting
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 229
User Guide
Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
Use only Xerox approved paper. For details, refer to Supported Paper on page 143.
Use only dry, undamaged paper.
C
AUTIONS: Some paper and other media types can cause poor output quality, increased
paper jams, or damage your printer. Do not use the following:
Rough or porous paper
Inkjet paper
Non-laser glossy or coated paper
Paper that has been photocopied
Paper that has been folded or wrinkled
Paper with cutouts or perforations
Stapled paper
Envelopes with windows, metal clasps, side seams, or adhesives with release strips
Padded envelopes
Plastic media
Transparencies
En
sure the paper type selected in your print driver matches the paper type on which you are
p
rinting.
If you have the same size paper loaded in more than one tray, ensure that the proper tray is
selected in the print driver.
Store your paper and other media properly for optimum print quality. For details, refer to Pap
er
S
torage Guidelines on page 144.
Solving Print-Quality Problems
When the print quality is poor, to correct the problem, select the closest symptom from the following
table and refer to the corresponding solution. You can also print Support pages to help detect image
quality problems. For details, refer to Device on page 65.
If the print quality does not improve after performing the appropriate action, contact your Xerox
representative.
Note: To maintain print quality, a warning message appears when the toner level is low or when the
drum cartridge is nearing the end of life. When the toner cartridge is empty, or when the drum cartridge
has reached end of life, a second message appears. The second message prompts you to replace the
expired cartridge. The printer stops printing until you install a new toner cartridge or drum cartridge.

Table of Contents

Other manuals for Xerox VersaLink B7030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7030 and is the answer not in the manual?

Xerox VersaLink B7030 Specifications

General IconGeneral
BrandXerox
ModelVersaLink B7030
CategoryAll in One Printer
LanguageEnglish

Related product manuals