Maintenance
188 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
4. Remove the new stapler cartridge from its packaging. Hold the tabs on both sides of the new staple
cartridge, then reinsert the staple cartridge into the original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
5. R
epeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
Emptying the Hole Punch Container
When the hole-punch waste container is full, a message appears on the touch panel.
WA
RNING: Do not perform this procedure when the printer is copying or printing.
1. Lift the finisher transport top cover, then open the front transport cover.
2. P
ull out the hole-punch waste container.
To Next Page
Loading...
Need help?
General
