Scanning
122 WorkCentre 3045 Multifunction Printer
User Guide
• Softer
• Softest
The default setting is Normal.
3. Press OK.
Changing the Auto Exposure Level
1. To select Auto Exposure Level, press the arrow buttons, then press OK.
2. Select an auto exposure setting:
• Off
• On
The default setting is On.
3. Press OK.
Setting the Margins
1. To select the margin you want to change, press the arrow buttons for:
• Margin Top/Bottom
• Margin Left/Right
• Margin Middle
2. Press OK.
3. Adjust the margins from 0.0–2.0 in. using the arrow buttons.
4. Press OK.
5. Repeat the steps for other margins, then press the Return button.
Setting the TIFF File Format
Note: TIFF files created by this printer can fail to open properly in some computer applications.
1. To select TIFF File Format, press the arrow buttons, then press OK.
2. Select a setting:
• TIFF V6
• TTN2
3. Press OK.
Setting the Image Compression
1. To select Image Compression, press the arrow buttons, then press OK.
2. Select a setting:
• Higher
• Normal
• Lower