Xerox WorkCentre 3045 User Manual

Troubleshooting
WorkCentre 3045 Multifunction Printer 161
User Guide
Probable Causes Solutions
The printer is connected to a power strip
shared with other high-power devices.
Plug the printer directly into the outlet or into a power strip that is
not shared with other high-power devices.
The Printer Does Not Print
Probable Causes Solutions
The printer is in Energy Saver mode. Push the control panel button.
PrintingScout displays an error message. Follow the instructions in the PrintingScout message to correct the
problem. If the error persists, contact your Xerox representative.
The printer is out of paper. Load paper into the tray.
A toner cartridge is empty. Replace the empty toner cartridge.
The Error Indicator is blinking. Turn off the printer, then turn it on again. If the error persists,
contact your Xerox representative.
No control panel indicators are lit. Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. If
the error persists, contact your Xerox representative.
The printer is busy. • If the Status Indicator is flashing green, it is normal. A previous
print job could be the problem. Use PrintingScout to delete all
print jobs in the print queue.
Load the paper in the tray.
• If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer. If the USB cable is properly connected, turn off the
printer, then turn it on again.
The printer cable is disconnected. • If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer.
• For the WorkCentre 3045NI Multifunction Printer: If the Status
Indicator is green, but not flashing, after you send a print job,
check the Ethernet connection between the printer and the
computer.
Printer is Making Unusual Noises
Probable Causes Solutions
There is an obstruction or debris inside the
printer.
Turn off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox representative.

Xerox WorkCentre 3045 Specifications

General

Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
All-in-one functions	Copy, Fax, Print, Scan
Compatible operating systems	Windows XP\\r Windows Vista\\r Windows Server 2003\\r Windows Server 2008\\r Windows 7\\r Mac OS v10.5+
Printing colors	Black
Maximum duty cycle	30000 pages per month
Number of print cartridges	1
Maximum copy resolution	600 x 600 DPI
Time to first copy (black, normal)	24 s
Scan to	E-mail, FTP, USB
Output color depth	8 bit
Image formats supported	JPG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Auto-redialing	Yes
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	99
Paper input type	Paper tray
Total input capacity	150 sheets
Total output capacity	100 sheets
Maximum input capacity	175 sheets
Multi-Purpose tray input capacity	10 sheets
Auto document feeder (ADF) input capacity	15 sheets
Custom media width	76 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 356 mm
Paper tray media types	Envelopes, Labels, Plain paper, Recycled paper
Paper tray media weight	60 - 163 g/m²
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
Auto Document Feeder (ADF) media weight	60 - 105 g/m²
Display	LCD
Market positioning	Home & office
Standard interfaces	USB 2.0
Internal memory	128 MB
Sound power level (standby)	15 dB
Sound pressure level (printing)	54 dB
AC input voltage	220 V
AC input frequency	50 - 60 Hz
Power consumption (off)	2.8 W
Power consumption (standby)	51.4 W
Power consumption (average operating)	332 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 85 %
Sustainability certificates	ENERGY STAR
Certification	TUV, UL/CSA, CB/IEC, FCC

Weight and Dimensions

Depth	389 mm
Width	410 mm
Height	318 mm