Regulatory Information
WorkCentre 3045 Multifunction Printer 197
User Guide
WARNING: Do not attempt to make such connections yourself. Contact the appropriate electric
inspection authority, or electrician, to make the ground connection.
The REN assigned to each terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface could consist of any
combination of devices. The only limitation to the number of devices is the requirement that the sum of
the RENs of the devices does not exceed 5. For the Canadian REN value, please see the label on the
equipment.
European Union
Radio Equipment and Telecommunications Terminal Equipment Directive
The Facsimile has been approved in accordance with the Council Decision 1999/5/EC for pan-European
single terminal connection to the public switched telephone network (PSTN). However, due to differences
between the individual PSTNs provided in different countries, the approval does not give an
unconditional assurance of successful operation on every PSTN network terminal point.
In the event of a problem you should contact your authorized local dealer.
This product has been tested to and is compliant with ES 203 021-1, -2, -3, a specification for terminal
equipment for use on analog-switched telephone networks in the European Economic Area. This product
provides a user-adjustable setting of the country code. The country code should be set prior to
connecting this product to the network. Refer to the customer documentation for the procedure for
setting the country code.
Note: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, we
recommend that you set it to use DTMF signaling for more reliable and faster call setup.
Modification of this product, connection to external control software, or connection to an external
control apparatus not authorized by Xerox
®
will invalidate its certification.
South Africa
This modem must be used in conjunction with an approved surge protection device.
New Zealand
1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates
no endorsement of the product by Telecom, it does not provide any sort of warranty, and it does not
imply that any Telepermitted product is compatible with all Telecom network services. Above all, it
provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model.
The equipment may not be capable of correct operation at the higher data speeds designated.
33.6 kbps and 56 kbps connections are likely to be restricted to lower bit rates when connected to
some PSTN implementations. Telecom will accept no responsibility for difficulties that arise in such
circumstances.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
