Copying
WorkCentre 3045 Multifunction Printer 95
User Guide
Automatic Document Feeder Guidelines
Note: Available on WorkCentre 3045NI Multifunction Printer only.
The automatic document feeder accommodates the following originals:
• Width: 148–216 mm (4.1–8.5 in.)
• Length: 210–355.6 mm (8.3–14 in.)
• Weight: 60–105 g/m² (16–28 lb. Bond)
Follow these guidelines when loading originals into the automatic document feeder:
• Load originals face up so that the top of the document enters the feeder first.
• Place only loose sheets of paper in the automatic document feeder.
• Adjust the paper guides so that they fit against the originals.
• Insert paper in the automatic document feeder only when ink on the paper is dry.
• Do not load originals above the MAX fill line.
Document Glass Guidelines
The document glass accommodates original sizes up to 216 x 297 mm (8.5 x 11.7 in.). Use the document
glass rather than the automatic document feeder to copy or scan the following types of originals:
• Paper with paper clips or staples attached
• Paper with wrinkles, curls, folds, tears, or notches
• Coated or carbonless paper or items other than paper such as cloth or metal
• Envelopes
• Books