Xerox WorkCentre 5016 User Manual

Cleaning the Machine
Xerox WorkCentre 5016/5020 User Guide 117
Note • If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small
amount of neutral detergent.
Cleaning the Film and Constant Velocity Transport Glass
If the Film and Constant Velocity Transport Glass are dirty, streaks or smears may
appear on copies, and the machine may not properly detect the size of the original
documents. To ensure clean copies at all times, clean the Film and Constant Velocity
Transport Glass about once a month.
The following procedure describes how to clean the Film and Constant Velocity
Transport Glass.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction, or damage documents being copied.
1. Wipe the Film with a soft cloth
moistened with water, and then wipe it
with a dry cloth.
Important • The Film can be damaged easily.
Do not clean the Film with an
excessive force.
• Do not use cleaning agents other
than water or neutral detergent.
Note • If dirt does not come off easily,
gently wipe it with a soft cloth
moistened with a small amount of
neutral detergent.
2. Wipe the Constant Velocity Transport Glass with a soft cloth moistened with water,
and then wipe it with a dry cloth.
Important • Do not use cleaning agents other than water or neutral detergent.
Note • If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small
amount of neutral detergent.
Cleaning the Document Feeder Roller
If the Document Feeder Roller is dirty, streaks or smears may appear on the output
copies, and may also result in paper jams. To ensure clean copies at all times, clean
the Document Feeder Roller about once a month.
The following procedure describes how to clean the Document Feeder Roller.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so may damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction, or damage documents being copied.
1. Pull up the latch to open the Document
Feeder Cover completely.
Film
Constant
Velocity
Transport
Glass
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 5016 Specifications

General

Brand	Xerox
Model	WorkCentre 5016
Category	All in One Printer
Language	English