Optional Accessories
Xerox WorkCentre 5016/5020 User Guide 130
Document Sizes Detectable by the Document Feeder
Depending on the measuring unit the machine is in, the document sizes that can be
detected by the Document Feeder change as shown in the table below. Switch the
measuring unit as necessary in the system setting (menu number: 15).
Note • When an undetectable size of document is loaded in the Document Feeder, the error code
[A2] appears in the display. For more information, refer to "Error Codes" (P.92).
O: Available / X: Not available
Optional Accessories
The following items are available for the machine. To purchase any of these optional
items, contact the Xerox Welcome Center.
Note • The optional accessories are subject to change without notice.
• For the latest information, contact the Xerox Welcome Center.
Selected value for Metric/Inch (menu number: 15)
Detectable Document Size 0: Metric 1: Inch13 2: Inch14
A5 SEF O O X
5.5 x 8.5" SEF X X O
B5 SEF O X X
B5 LEF O O O
A4 SEF O O O
A4 LEF O O O
8.5 x 11" SEF O O O
8.5 x 11" LEF O O O
8.5 x 13" SEF X O X
8.5 x 13.4" SEF X X O
8.5 x 14" SEF X X O
B4 SEF O O O
16K SEF X X X
16K LEF O X X
8K SEF O X X
A3 SEF O O O
11 x 17" SEF O O O
Non-standard paper size X X X
Product Name Description
Paper Tray 2 Adds an additional tray that can be used as Tray 2.
Stand Elevates and stabilizes the machine for optimum use, and the
attached casters allow you to easily move the machine.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
