Xerox WorkCentre 5016/5020 User Guide 78
7Printing
This chapter describes the basic flow of a print job, starting from setting up the printer,
and the basic printing procedure.
Important • You must install the print driver in advance. For information on how to install the print
driver, refer to "Installing the Print Driver and the Scan Driver (TWAIN driver)" (P.34).
Setting Up the Printer
This section describes how to set up the printer preferences and how to specify the
custom paper size.
Setting the Printer Preferences
The following procedure describes how to specify the printer preferences.
1.
Select [Start] at the bottom of the screen, then select [Printers and Faxes].
The [Printers and Faxes] dialog box appears.
2.
Right-click on the [Xerox WorkCentre 5016], [Xerox WorkCentre 5020/B], or
[Xerox WorkCentre 5020/DB] printer, and select [Properties] from the displayed
pop-up menu.
Note • Because this procedure to open the [Properties] dialog box uses Windows XP as an
example, you may have to open the [Properties] dialog box in different ways,
depending on the operating system in use. Refer to a guide provided with the operating
system for more information.
The [Properties] dialog box appears.
3.
Click [Printing Preferences].
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
