Xerox WorkCentre 5016/5020 User Guide 119
11 Appendix
This chapter provides the machine specifications, system settings menu list, optional
accessory list.
Specifications
This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
Copy Feature Specifications
Type Console
Copying method Laser Xerography
Scan resolution 600 x 600 dpi (23.6 x 23.6 dots/mm)
Output resolution 600 x 600 dpi (23.6 x 23.6 dots/mm)
Gradation 256 levels
Warm-up time 27 seconds or less (at 22°C room temperature)
Copy document The maximum size is 297 x 432 mm (A3, 11 x 17") for both sheets
and books
Development method Dry development (single component)
Document table type Fixed
Photosensitive type OPC
Fusing system Heat roller
Scanning method Flatbed scanning using CCD image sensor
Copy paper size [Trays 1 - 2]
Maximum: A3 SEF (297 x 420 mm), 11 x 17" SEF (279 x 432
mm)
Minimum : A5 SEF (148 x 210 mm)
[Bypass Tray]
Maximum: A3 SEF (297 x 420 mm), 11 x 17" SEF (279 x 432
mm)
Minimum : A5 SEF (148 x 210 mm)
Non-standard size: X direction 182 to 432 mm
Y direction 140 to 297 mm
Image loss width: Leading edge 4 mm or less, trailing edge 4 mm
or less, and top/front 4 mm or less.
Copy paper weight Tray 1 : 60 - 90g/m
2
Tray 2 : 60 - 90g/m
2
Bypass Tray : 60 - 110g/m
2
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
