Xerox WorkCentre 5016 User Manual

Xerox WorkCentre 5016/5020 User Guide 83
8 Scanning
This chapter describes the scan driver (TWAIN driver) and the scan application (Button
Manager), and provides the basic scanning procedure.
The Scan Driver (TWAIN driver) and Button Manager
This section provides information on the TWAIN driver and Button Manager.
TWAIN driver
The TWAIN driver allows you to acquire an image that is scanned on the machine. You
can import a scanned image to a computer through the TWAIN driver.
For information on how to install the scan driver (TWAIN driver), refer to "Installing the Print Driver and the Scan
Driver (TWAIN driver)" (P.34).
Button Manager
Button Manager is a scanner application that can be installed on a computer, which
allows you to scan a document that has been loaded on the machine, and to convert
the scanned document into a BITMAP file, a PDF file, or a TIFF file. This scanner
application uses the TWAIN driver to acquire images scanned on the machine, so the
TWAIN driver must be installed on the computer in order to use this application.
For information on how to install Button Manager, refer to "Installing the Scanner Application (Button Manager)"
(P.38).
Scanning Procedure (Using the TWAIN driver)
The following procedure describes a basic scanning procedure when using the TWAIN
driver.
1. Load a document.
• When scanning a document from the Document Feeder
1) Place a document face up in the
center of the Document Feeder.
Note • The indicator on the Machine
Diagram (mimic) lights up when a
document is loaded correctly in the
Document Feeder. If the indicator
does not light up, the document
may not be loaded properly in the
Document Feeder.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 5016 Specifications

General

Brand	Xerox
Model	WorkCentre 5016
Category	All in One Printer
Language	English