ZCU111 Board User Guide 57
UG1271 (v1.1) August 6, 2018 www.xilinx.com
Chapter 3: Board Component Descriptions
RF RFMC Plug-in Card Interface
Two Samtec LPAF (8x40) connectors provide access to the ADC/DAC clocking and data path
signals. The Samtec part number is LPAF-40-03.0-S-08-2-K-TR. See Tabl e 3-2 0 and
Figure 3-20
.
The RFMC LPAF connector pin definitions are shown in Figure 3-21 (RF-ADC) and
Figure 3-22 (RF-DAC).
Table 3-20: RF RFMC Plug-in Card Interface
Technical Details
Part number LPAF-40-03.0-S-08-2-K-TR
Series LPAF
Number of positions –40
Lead style –03.0 = 3.0 mm
Plating option
Non-standard option
Contact SAMTEC: –S = 30µ
Selective gold in contact area, matte tin on tail
Row option –08 = eight row
Solder type –2 = 95.5% tin/3.8% silver/.7% copper crimp tail
Pick and place pad –K - polyamide file pad
Tape and reel packaging –TR = tape and reel packaging
X-Ref Target - Figure 3-20
Figure 3-20: SAMTEC Connector
To Next Page
Loading...
Need help?
General
