6.Alarm list
Type Code Description Reasons Solutions
EEEE
1 EEEE1
Communication error
between panel and
CPU
(1) Voltage fluctuation
of power supply is
large, and low voltage
leads to failure of panel
refresh; (2) Damage of
panel program
(1) Stable power supply to ensure
the stability of power supply
voltage.
(2) after repower on the driver, if
the alarm cannot be removed,
please contact the agent or the
manufacturer.
2 EEEE2
3 EEEE3
4 EEEE4
01
0 E-010
Firmware version
mismatch
Downloaded firmware
version error
please contact the agent or the
manufacturer
2 E-012 System Loading Error Program damage
please contact the agent or the
manufacturer
3 E-013 FPGA Loading Error
(1) Program damage
(2) Device damage
please contact the agent or the
manufacturer
4 E-014 FPGA Access error
(1) Program damage
(2) Device damage
(3) serious external
interference
please contact the agent or the
manufacturer
5 E-015 Program running error Program damage
please contact the agent or the
manufacturer
6 E-016
Processor Running
Error
Hardware damage
please contact the agent or the
manufacturer
7 E-017
Processor Running
Timeout
Program damage please contact the agent or the
manufacturer
8 E-018 FPGA running timeout
Program damage please contact the agent or the
manufacturer
9 E-019 System password error
Program damage please contact the agent or the
manufacturer
02 0 E-020 Parameter loading
error
Failure of parameter
self-checking
Re-energizing can restore default
parameters, if there are repeated
problems, please contact the agent
or manufacturer.
74
To Next Page
Loading...
Need help?
General
