EasyManuals Logo
Home>Yaesu>Transceiver>FTdx5000MP

Yaesu FTdx5000MP User Manual

Yaesu FTdx5000MP
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Page 105FTDX5000 OPERATING MANUAL
MEMORY GROUPS
Memory channels may be grouped into as many as six convenient batches, for easy identification and selection. For ex-
ample, you might want to set aside memory groups for AM BC stations, shortwave broadcast stations, contest frequencies,
repeater frequencies, and PMS limits, or any other groupings you like.
Each memory group is capable of holding up to 19 or 20 memory channels (the Group size is fixed). When a memory
channel is grouped, the channel numbers change to correspond to the chart below:
Memory Group Assignment
1. Press the
[
MENU
]
button briefly, to enter the Menu
mode.
2. Rotate the
(
VFO-A
)[
SELECT
]
knob to select Menu
item “032 GENE MEM GRP”.
3. Rotate the
(
VFO-B
)[
SELECT
]
knob to set this Menu
item to “ENABLE” (the default setting is “DISABLE”).
4. Press and hold in the
[
MENU
]
button for two seconds
to save the new setting and exit. Operation will now be
restricted to the six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (4) above, choosing “DISABLE” in step (3).
ADVICE
Note that for the PMS memory group, the PMS memories
P1L” through “P9U” will be so designated, to avoid con-
fusion.
Choosing the Desired Memory Group
You may recall memories just within a particular Memory
Group, if desired.
1. Press the
[
V/M
]
button briefly, if necessary to enter the
Memory mode.
2. Press and hold the
[
CLAR/GRP
]
button for two sec-
onds. The
[
CLAR/GRP
]
button will glow yellow.
3. Rotate the
[
CLAR
(
VFO-B
)]
knob to select the desired
Memory Group.
4. Press and hold the
[
BAND/MCH
]
button. The
[
BAND/
MCH
]
button will glow yellow.
5. Rotate the
[
CLAR
(
VFO-B
)]
knob to select the desired
Memory Channel within the Selected Memory Group.
ADVICE:
If no channels have been assigned to a particular Memory
Group, you will not have access to that Group.
MEMORY OPERATION
(
VFO-B
)[
SELECT
]
Knob
[
MENU
]
Button
(
VFO-A
)[
SELECT
]
Knob
GROUP MEMORY “OFF”
01 ~ 19
20 ~ 39
40 ~ 59
60 ~ 79
80 ~ 99
P-1L/1U ~ P-9L/9U
MEMORY CHANNEL NUMBER
GROUP MEMORY “ON”
1-01 ~ 1-19
2-01 ~ 2-20
3-01 ~ 3-20
4-01 ~ 4-20
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
[
CLAR
(
VFO-B
)]
Knob
[
V/M
]
Button
[
BAND/MCH
]
Button
[
CLAR/GRP
]
Button

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaesu FTdx5000MP and is the answer not in the manual?

Yaesu FTdx5000MP Specifications

General IconGeneral
BrandYaesu
ModelFTdx5000MP
CategoryTransceiver
LanguageEnglish

Related product manuals