Yaesu FTdx5000MP User Manual

Page 123FTDX5000 OPERATING MANUAL
KEYER GROUP
026 KEY CW MEM2
Function: Permits entry of the CW message for message
register 2.
Available Values: TEXT / MESSAGE
Default Setting: MESSAGE
TEXT: You may enter the CW message from the
FH-2’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
027 KEY CW MEM3
Function: Permits entry of the CW message for message
register 3.
Available Values: TEXT / MESSAGE
Default Setting: MESSAGE
TEXT: You may enter the CW message from the
FH-2’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
028 KEY CW MEM4
Function: Permits entry of the CW message for message
register 4.
Available Values: TEXT / MESSAGE
Default Setting: MESSAGE
TEXT: You may enter the CW message from the
FH-2’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
029 KEY CW MEM5
Function: Permits entry of the CW message for message
register 5.
Available Values: TEXT / MESSAGE
Default Setting: MESSAGE
TEXT: You may enter the CW message from the
FH-2’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
MENU MODE
022 KEY BEACON
Function: Sets the interval time between repeats of the
beacon message.
Available Values: OFF / 1s ~ 240 sec (1 sec/step) /
270s ~ 690 sec (30 sec/step)
Default Setting: OFF
023 KEY NUM STL
Function: Selects the Contest Number “Cut” format for
an imbedded contest number.
Available Values: 1290 / AUNO / AUNT / A2NO / A2NT
/12NO / 12NT
Default Setting: 1290
1290: Does not abbreviate the Contest Number
AUNO: Abbreviates to “A” for “One,” “U” for “Two,”
“N” for “Nine,” and “O” for “Zero.”
AUNT: Abbreviates to “A” for “One,” “U” for “Two,”
“N” for “Nine,” and “T” for “Zero.”
A2NO: Abbreviates to “A” for “One,” “N” for “Nine,”
and “O” for “Zero.”
A2NT: Abbreviates to “A” for “One,” “N” for “Nine,”
and “T” for “Zero.”
12NO: Abbreviates to “N” for “Nine,” and “O” for
“Zero.”
12NT: Abbreviates to “N” for “Nine,” and “T” for
“Zero.”
024 KEY CONTEST
Function: Enters the initial contest number that will in-
crement/decrement after sending during contest QSOs.
Available Values: 0 ~ 9999
Default Setting: 1
ADVICE:
Press the
[
CLEAR
]
button to reset the contest number to
“1.”
025 KEY CW MEM1
Function: Permits entry of the CW message for message
register 1.
Available Values: TEXT / MESSAGE
Default Setting: MESSAGE
TEXT: You may enter the CW message from the
FH-2’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.

Yaesu FTdx5000MP Specifications

General

Brand	Yaesu
Model	FTdx5000MP
Category	Transceiver
Language	English