Yaesu FTdx5000MP User Manual

Page 7FTDX5000 OPERATING MANUAL
RESETTING THE MICROPROCESSOR
RESETTING MEMORIES
(
ONLY
)
Use this procedure to reset (clear out) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel
[
POWER
]
switch to turn the trans-
ceiver off.
2. Press and hold in the
[
A

M
]
button; while holding it
in, press and hold in the front panel
[
POWER
]
switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
MENU RESETTING
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel
[
POWER
]
switch to turn the trans-
ceiver off.
2. Press and hold in the
[
MENU
]
button; while holding it
in, press and hold in the front panel
[
POWER
]
switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
FULL RESET
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel
[
POWER
]
switch to turn the trans-
ceiver off.
2. Press and hold in the
[
FAST
]
and
[
LOCK
]
buttons;
while holding them in, press and hold in the front panel
[
POWER
]
switch to turn the transceiver on. Once the
transceiver comes on, release the switches.
BEFORE YOU BEGIN
[
POWER
]
Switch
[
A

M
]
Button
[
POWER
]
Switch
[
MENU
]
Button
[
POWER
]
Switch
[
FAST
]
/
[
LOCK
]
Button

Yaesu FTdx5000MP Specifications

General

Brand	Yaesu
Model	FTdx5000MP
Category	Transceiver
Language	English