Page 116 FTDX5000 OPERATING MANUAL
MENU MODE
The Menu system of the FTDX5000 provides extensive customization capability, so you can set up your transceiver just the
way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGC
FST DLY” to “176 TGEN EMRGNCY.”
USING THE MENU
1. Press the
[
MENU
]
button momentarily, to engage the
Menu mode.
The SUB DISPLAY-I window will show the Menu
Number and Menu Group name, while the SUB DIS-
PLAY-II window will show the Menu item; the SUB
DISPLAY-III window shows the current setting of the
currently-selected Menu item.
2. Rotate the
(
VFO-A
)[
SELECT
]
knob to select the
Menu item you wish to work on.
3. Rotate the
(
VFO-B
)[
SELECT
]
knob to change the cur-
rent setting of the selected Menu item.
ADVICE:
Press the
[
CLEAR
]
button momentarily to reset the
selected Menu item to the factory default value.
4. When you have finished making your adjustments,
press and hold in the
[
MENU
]
button for two seconds
to save the new setting and exit to normal operation. If
you only momentarily press the
[
MENU
]
button, the
new settings will not be retained.
Menu Mode Reset
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel
[
POWER
]
switch off.
2. Press and hold in the
[
MENU
]
button, and while holding it in, press the
[
POWER
]
switch to turn the transceiver
back on. Now release the
[
MENU
]
button.
(
VFO-B
)[
SELECT
]
Knob
[
MENU
]
Button
(
VFO-A
)[
SELECT
]
Knob
[
CLEAR
]
Button
To Next Page
Loading...
Need help?
General
