Yaesu FTdx5000MP User Manual

Page 132 FTDX5000 OPERATING MANUAL
MENU MODE
SCOPE GROUP
ADVICE:
This group’s adjustment has no effect, if the optional DMU-
2000 Data Management Unit is not connected.
131 SCP 1.8 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 160 m amateur
band.
Available Values: 1800kHz ~ 1999kHz (1 kHz/step)
Default Setting: 1800kHz
132 SCP 3.5 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 80 m amateur
band.
Available Values: 3500kHz ~ 3999kHz (1 kHz/step)
Default Setting: 3500kHz
133 SCP 5.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 60 m amateur
band.
Available Values: 5250kHz ~ 5499kHz (1 kHz/step)
Default Setting: 5250kHz
134 SCP 7.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 40 m amateur
band.
Available Values: 7000kHz ~ 7299kHz (1 kHz/step)
Default Setting: 7000kHz
135 SCP 10.1 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 30 m amateur
band.
Available Values: 10100kHz ~ 10149 kHz (1 kHz steps)
Default Setting: 10100kHz
125 RDSP VPKT SHP
Function: Selects the passband characteristics of the DSP
filter for the PKT mode on the 50 MHz band.
Available Values: SOFT / SHARP
Default Setting: SHARP
SOFT: Primary importance is attached to the phase
of the filter factor.
SHARP: Primary importance is attached to the ampli-
tude of the filter factor.
126 RDSP VPKT SLP
Function: Selects the shape factor of the DSP filter for
the PKT mode on the 50 MHz band.
Available Values: STEEP / MEDIUM / GENTLE
Default Setting: MEDIUM
127 RDSP VRTY SHP
Function: Selects the passband characteristics of the DSP
filter for the RTTY mode on the 50 MHz band.
Available Values: SOFT / SHARP
Default Setting: SHARP
SOFT: Primary importance is attached to the phase
of the filter factor.
SHARP: Primary importance is attached to the ampli-
tude of the filter factor.
128 RDSP VRTY SLP
Function: Selects the shape factor of the DSP filter for
the RTTY mode on the 50 MHz band.
Available Values: STEEP / MEDIUM / GENTLE
Default Setting: MEDIUM
129 RDSP VSSB SHP
Function: Selects the passband characteristics of the DSP
filter for the SSB mode on the 50 MHz band.
Available Values: SOFT / SHARP
Default Setting: SHARP
SOFT: Primary importance is attached to the phase
of the filter factor.
SHARP: Primary importance is attached to the ampli-
tude of the filter factor.
130 RDSP VSSB SLP
Function: Selects the shape factor of the DSP filter for
the SSB mode on the 50 MHz band.
Available Values: STEEP / MEDIUM / GENTLE
Default Setting: MEDIUM
RX DSP GROUP

Yaesu FTdx5000MP Specifications

General

Brand	Yaesu
Model	FTdx5000MP
Category	Transceiver
Language	English