Page 6 FTDX5000 OPERATING MANUAL
CONNECTING AC POWER
The FTDX5000 is equipped with a universal power sup-
ply supporting 100 V to 264 V AC.
Therefore, the FT
DX5000 will operate on a voltage range
from 100V to 264 V without changing a voltage select
switch. Just use the power plug that matches your wall
outlet.
ADJUSTING THE MAIN TUNING DIAL TORQUE
The torque (drag) of the Main Tuning Dial knob may be
adjusted according to your preferences. Simply hold down
the rear skirt of the knob, and while holding it in place
rotate the knob itself to the right to reduce the drag or to
the left to increase the drag.
EXTENDING THE FRONT FEET
BEFORE YOU BEGIN
In order to elevate the front panel for easy viewing, the
front left and right feet of the bottom case may be extended.
Pull the front legs outward from the bottom panel.
Rotate the legs counter-clockwise to lock them in the
extended position. Be sure the legs have locked se-
curely in place, because the transceiver is quite heavy
and an unlocked leg could result in damage, should
the transceiver move suddenly.
Retracting the Front Feet
Rotate the legs clockwise, and push them inward while
rotating to the right.
The front feet should now be locked in the retracted
position.
TIGHTEN LOOSE
Hold the Skirt
To Next Page
Loading...
Need help?
General
