101
Modifying the Drum Kits
The name function allows you to assign a five character name to the
drum kit you have just modified.
1
Place the unit in Drum Kit Mode by pressing the [DRUM KIT] button. Select
a drum kit by rotating the Jog Dial or by using the [ +1 ] and [ –1 ] buttons.
2
Select the Name display page by pressing the [PAGE+] button until the
display reads “NAME” and displays the name of the current drum kit.
Notice that the first character is flashing.
3
Select the first character of the name by rotating the Jog Dial or by using
the [ +1 ] and [ –1 ] buttons.
4
To move to the next character, press the [ > ] cursor button. The second
character will flash. Change that character by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
5
Repeat the previous step until you have finished creating your drum kit
name.
■ Name
NOTE
The RY20 contains the following character set, allowing you to use numbers, upper
and lower case letters and symbols for your name.
(Space)
!”#$%&’()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX
YZ[¥]^_‘abcdefghijklmnopqrstuvwxyz{|}→←
DRUM KIT
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
To Next Page
Loading...
Need help?
General
