72
Recording a Song
The RY20 has a built-in click which you can use as a “count-in” in
Real-time Record Mode. You can change both the volume and the
quantization of the click sounds.
1
Select the Click display page by pressing the [ PAGE+ ] button until the
display indicates “CLICK”. Notice the current volume level flashing.
2
Set the volume by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
buttons.
The default volume is “15”. The range is from “00” to “15”.
3
Set the quantization by using the [ > ] cursor button to change the focus to
the “QUANTIZE” prompt. Change the value by rotating the Jog Dial or
using the [ +1 ] and [ –1 ] buttons.
The default quantization is quarter note. The quantization values are:
• = quarter note.
• = eighth note.
• = eighth note triplet.
• = 16th note.
• = 16th note triplet.
■ Adjusting the Click
NOTE
Pressing the
[ +1 ] and [ –1 ] buttons simultaneously resets the level to “00”.
NOTE
Changing the volume level or quantization in Song Record Mode also changes it in
Pattern Record Mode.
PAGE – PAGE +
SONG
A CHASE
LEVEL
QUANTIZE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
3
3
To Next Page
Loading...
Need help?
General
