120
The following procedure can be used to reset ALL the RY20
parameters to their initial default settings. It will clear ALL the
patterns, songs, and kits you have created.
1
Turn the RY20 power OFF.
2
Press and hold both the [ +1 ] and [ –1 ] buttons. Turn the power back on.
“FACTRY SET” will momentarily appear on the display and the Record and
Play LEDs will flash.
The “YAMAHA RY20” prompt will appear, then the instrument will default
to Pattern Play Mode.
Appendix
■ Total Reset Procedure
IMPORTANT
Be sure to save any data you want to keep on a MIDI data storage device such as the
Yamaha MDF2 MIDI Data Filer before you carry out the total reset procedure.
–1 +1
PAD BANK
OTHERS
HH
SD
BD
To Next Page
Loading...
Need help?
General
