105
Changing the Effects
The return level is the amount of processed effect from the DSP.
1
Select the Return Level display page by pressing the [ PAGE+ ] or [ PAGE– ]
button. The current level flashes under the “RTNLVL” prompt.
2
Set the return level by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
The range is from “00” to “31”. A level of “31” is the maximum signal level
and a level of “00” turns off the parameter.
■ Return Level
HINT
Judicious use of the return level will give you a reasonably clean sound. A high
return level generates a lot of reflected sound.
NOTE
You can change the Return Level for the preset drum kits. Your altered setting will
stay in effect until you select another drum kit.
PAGE – PAGE +
PATTERN EFFECT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
To Next Page
Loading...
Need help?
General
